Limited Swing Range of the Loop, to Keep Carabiner away from Camera.
Limited Swing Range of the Loop, to Keep Carabiner away from Camera.

SS2P2 Retrofit Quick Release Plug Adapter for Camera Shoulder Straps

On sale $39.95
Retail Price:$49.95
Your Savings:$10.00(20%)
Limited Quantities, order now.
Part Number:SS2P2

Choose Options

Custom Plate for Camera?
SS2 QD Camera Strap system DSLR Mirrorless

Steps to attach SS2


Retrofit your current strap with less than 1 inch webbing to our SS2 Quick Release Adapter with ease!

To install, simply lay the mechanism over your strap webbing and push the pin through the hole and across to the other side. Open the loctite and place a small drop inside the threaded area. Insert the supplied screw and tighten. The screw will pull the pin snuggly into the other side of the strap. As an added measure of safety we manufactured the SS2P3 with (2) small additional set screws. Insert a drop of loctite into each hole and carefully install the small screws. That's it!! You may choose to leave the other mechanism on your strap or carefully remove it. The SS2P3 is compatible with the PMG Quick Release Strap System. Let nothing get in the way of your creativity, Get Shooting!

Made in the USA by photographers for photographers! We pride ourselves in being experienced photography professionals and design gear we would use. There's nothing more important than our customers' satisfaction. So, What Are You Still Waiting For? Order Your Own Premium SS2P3 Quick Release Retrofit Adapter Today!!

SS2P3 Retrofit Quick Release Assembly Instructions (pdf)

SS2 Quick Release Strap Adapter Instructions 

5 Stars
This is the new version retrofit quick connect. I also use the older version retrofit. I loved the old version and when I went to buy a second one, I couldn't find it - then I saw the new model. This is the best way to carry a large lens with attached camera. Strap comes off quickly yet it is robust. I've used with Nikon 500/f4 with gripped D500, Sony A7RIII, RIV, III and 100-400. As long as you use the PMG plates you can share the same strap with the connector for any that have the plate mounted. I love this product! IF you use one, you won't want to use anything else. The new model retrofit quick connect mounts on the carabiner clip featured on the more recent Blackrapid straps.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Indiana. on 10/21/2019
5 Stars
Ideal for updating old systems
This clips on to most old clip systems, I use it with Peak Design anchors and some other straps with small carabiners. Tough and well built
Did you find this helpful? 
Reviewed by:  from London. on 12/11/2019
5 Stars
Handy Strap Accessory
I've been using the SS2P2 Retrofit Quick Release Plug Adapter to attach my Black Rapid strap to a Nikkor 200-500mm f/5.6 (via PMG Archa Swiss plate) when shooting handheld as well as with the PMG L-Bracket for Nikon D850. It provides a solid connection and I've had no issues whatsoever.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Florida. on 12/17/2019
5 Stars
Another solid product fro PMG Well machined and works flawlessly Can always depend on the quality of PMG products
Did you find this helpful? 
Reviewed by:  from Pickering. on 2/2/2020
4 Stars
Strong and Reliable Plug
I use this plug to connect my 5D IV or EF 100-400 L IS II to my shoulder strap via OpTech Uni Loop Connector as shown on the image attached. It is built strong as two other design, SS2P1&3. The reason for minus one star is due to its limited angular movement compared to other two plugs, 90 degrees vs 270 .
Did you find this helpful? 
Reviewed by:  from glendale. on 3/25/2020

Related Items

Recently Viewed Items

Browse By Category